Manufacturing Information Solutions Forum Index Manufacturing Information Solutions
Your Place for Support and Discussions
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Okuma System Variables

 
Post new topic   Reply to topic    Manufacturing Information Solutions Forum Index -> Okuma
View previous topic :: View next topic  
Author Message
mistux
Site Admin


Joined: 25 Jun 2004
Posts: 1042
Location: South Bend, Indiana USA

PostPosted: Fri Mar 19, 2010 8:11 am    Post subject: Okuma System Variables Reply with quote

1 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VACMD n/f Interference check mode for Collision Avoidance System
VAPAB AB216 r/o B-axis (contouring) actual position (machine coordinate system)
VAPAC AB216 r/o C-axis actual position (machine coordinate system)
VAPAS AB216 r/o Spindle actual position (machine coordinate system)
VAPAW AB216 r/o W-axis actual position (machine coordinate system)
VAPAX mult r/o X-axis actual position (machine coordinate system)
VAPAZ list r/o Z-axis actual position (machine coordinate system)
VAPPB 5295 r/o Tool retract intervention point in B-axis
VAPPC 5295 r/o Tool retract intervention point in C-axis
VAPPW 5295 r/o Tool retract intervention point in W-axis
VAPPX spc r/o Tool retract intervention point in X-axis
VAPPY 5295 r/o Tool retract intervention point in Y-axis
VAPPZ spc r/o Tool retract intervention point in Z-axis
VAPYI AB216 r/o YI-axis actual position (machine coordinate system)
VAPYS sim r/o YS-axis actual position (machine coordinate system)
VASTP n/f ATC sequence number
VBCDE gag [1] BCD error / Measured value- Post process input screen
VBINE P,r/o Independence encoder APA for B-axis
VBLCS 5068S r/o Backlash for Steady Rest
VBLCX n/f Backlash value: X-axis
VBLCY n/f Backlash value: YS-axis
VBLCZ n/f Backlash value: Z-axis
VBNCT 5295 Block number count or not count, Tool Retract (without P-control)
VCAC1 n/f C-axis Joint, 1st Spindle Engaged
VCAC2 n/f C-axis Joint, 2nd Spindle Engaged
VCDIR gag r/o C-axis rotation direction
VCEJM gag [1] CEJ MATIC read data 0 to 99999.999 1 to 12
VCHIO list Chuck ID grip/OD grip changeover data
VCHKD pgm Chuck jaw dimension D1
VCHKL pgm Chuck jaw dimension L1
VCHKX pgm Chuck jaw position CX
VCHKZ pgm Chuck jaw position CZ
VCHSW list Chuck work/between-centers work changeover data
VCKRL
VCNGB
VCNGC list Post-process gauging NG consecutive counter 0 to 255
VCNZB sim ZB-axis command target point (machine coordinate system)
VCPFI gag r/o Flag to indicate presence of Groove
VCTFN P,r/o Cutting Finish
Var man suffix Description of system variable
2 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VDIFX list r/o DIF in X-axis
VDIFZ list r/o DIF in Z-axis
VDIN pgm [1] Input read Variables
VDOUT pgm [1] Output read Variables
VDRMA 5243 NC / Ball-screw front door- middle position
VEINT spc Interruption permitted axis command
VETFX gag r/o Presently used tool offset amount in X-axis
VETFY yax r/o Presently used tool offset amount in YI-axis
VETFZ gag r/o Presently used tool offset amount in Z-axis
VETLN gag r/o Tool number of active tool
VETON gag r/o Tool offset number of active tool
VETLP indx Current Used Edge Number (Lathe Tool Index Opt., Mac/Mult)
VETZB sim Presently used tool offset amount in ZB-axis
VEXAX gag [1] RS232C post-process gauging axis 0/1
VEXDR gag RS232C post-process gauging data end variable 0/80 None
VEXFB gag [1] RS232C post-process gauging feedback value 0 to 999999
VEXGF gag [1] RS232C post-process gauging group flag
VEXOG gag [1] RS232C post-process gauging offset group number 0 to 3
VEXOK gag [1] RS232C post-process gauging result 0/1
VEXPO gag [1] RS232C post-process gauging point 0 to 9
VEXTO gag [1] RS232C post-process gauging tool offset number 0 to 32
VEXTR gag [1] RS232C post-process gauging turret
VFLTP pgm Spindle speed variation cycle (P)
VFLTQ pgm Spindle speed variation amplitude (Q)
VFLTR pgm Interval timer (R)
VIGDB n/f Tool Index (Sub-mag spec.)
VGINB smag r/o Tool Index Flag, tool life expired tool (Sub-magazine spec)
VGRA1 spc [1] Tool nose angle 0 to 360.000
VGRA2 spc [1] Cutting edge angle 0 to 360.000
VGRAG n/f [1] Slant angle tool holder (Group)
VGRD spc [1] Tool holder dia./drill dia. 0 to 9999.999
VGRFB indx [1] ATC 2nd POS. Tool form code number (Group)
VGRFN spc [1] Tool form code number 0 to 4
VGRIB indx [1] ATC 2nd POS. tool type code (Group)
VGRID gag [1] Tool index occurrence variable (group tools)
VGRIN spc [1] Tool classification code number 1 to 38
VGRL spc [1] Tool holder length/projection/drill length
VGRLF list [1] Tool life variable (group tools)
VGRNR indx [1] Nose radius of Button tool (group)
VGRPA n/f [1] Tool shape of Base position (Group)
3 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VGRPB n/f [1] Tool shape of Vertical position (Group)
VGRSL gag [1] Tool number selected in the group 0 to 96 1 to 12
VGRTP indx Edge Number for Group (45deg Index opt.)
VGRW spc [1] Tool width
VHPPX n/f [1] Home position of X-axis
VHPPZ n/f [1] Home position of Z-axis
VIMDR n/f P,r/o In-process gauging data reading set
VIMDX gag [1] X-axis in-process gauging data
VIMDY gagy [1] Y-axis in-process gauging data
VIMDZ gag [1] Z-axis in-process gauging data
VIMPB n/f Panel Input of in-process gauge (push button)
VINPB sim Droop amount in B-axis
VINPC pgm Droop amount in C-axis
VINPW 4373 Droop amount in W-axis
VINPX pgm Droop amount in X-axis
VINPY yax Droop amount in Y-axis
VINPZ pgm Droop amount in Z-axis
VIRD pgm [1234] Input read condition, I/O
VKND mult Long Tool
VKND1 m421 [1] Turret tool information 1
VKND2 n/f [1] Turret tool information 2
VLDRP B Loader Escape position
VLIND n/f M602/M603 Position ( 0=no clamp, 1=0deg, 2=180deg)
VLKST n/f B Warming up Cycle ON
VLMB1 n/f [1] First limit value for load monitor data, SB-axis
VLMB2 n/f [1] Second limit value for load monitor data, SB-axis
VLMBB n/f [1] Base value for load monitor data, SB-axis
VLMC1 n/f [1] First limit value for load monitor data, C-axis
VLMC2 n/f [1] Second limit value for load monitor data, C-axis
VLMCB n/f [1] Base value for load monitor data, C-axis
VLMM1 n/f [1] First limit value for load monitor data, M-axis
VLMM2 n/f [1] Second limit value for load monitor data, M-axis
VLMMB n/f [1] Base value for load monitor data, M-axis
VLMON spc [1] Load monitoring axis command 0 to 127 1 to 64
VLMS1 n/f [1] First limit value for load monitor data, Main spindle
VLMS2 n/f [1] Second limit value for load monitor data, Main spindle
VLMSB n/f [1] Base value for load monitor data, Main spindle
VLMT1 n/f [1] First limit value for load monitor data, B-axis
VLMT2 n/f [1] Second limit value for load monitor data, B-axis
VLMTB n/f [1] Base value for load monitor data, B-axis
4 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VLMW1 n/f [1] First limit value for load monitor data, W-axis
VLMW2 n/f [1] Second limit value for load monitor data, W-axis
VLMWB n/f [1] Base value for load monitor data, W-axis
VLMX1 n/f [1] First limit value for load monitor data, X-axis
VLMX2 n/f [1] Second limit value for load monitor data, X-axis
VLMXB n/f [1] Base value for load monitor data, X-axis
VLMY1 n/f [1] First limit value for load monitor data, Y-axis
VLMY2 n/f [1] Second limit value for load monitor data, Y-axis
VLMYB n/f [1] Base value for load monitor data, Y-axis
VLMZ1 n/f [1] First limit value for load monitor data, Z-axis
VLMZ2 n/f [1] Second limit value for load monitor data, Z-axis
VLMZB n/f [1] Base value for load monitor data, Z-axis
VLRG lfgl [1] Loader register data 0 to 32767
VLVV sim [1] Loader Point Data-V
VLXV lfgl [1] Loader Point Data-X
VLYV lfgl [1] Loader point data Y-axis 1 to 99
VLZV lfgl [1] Loader point data Z-axis
VMCN gag [1] Gauging counter 0 to 9999 1 to 32
VMCNO 5283 r/o Machine number for DNC-C ethernet
VMDT gag [1] A/B turret data transfer variable
VMENG n/f Gauging result NG
VMIRX sim r/o X-axis Coordinate system direction match flag
VMIRY gagy r/o Y-axis Coordinate system direction match flag
VMIRZ list r/o Z-axis Coordinate system direction match flag
VMLCK mult Machine Lock engaged
VMNA1 list [1] MIN in tool nose form code table A1
VMNA2 list [1] MIN in tool nose form code table A2
VMSCH r/o Cutting ST- side chuck confirmation (Law-V ACC)
r/o MT designated tool number
MT
r/o MT designated turret number
MT
VMXA1 list [1] MAX in tool nose form code table A1
VMXA2 list [1] MAX in tool nose form code table A2
VNRPA n/f [1] First spindle base pos/pos A Nose radius compensation pattern
VNRPB n/f [1] First spindle vertical pos/pos A Nose radius compensation patten
VNRPC n/f [1] Second spindle base pos/pos A Nose radius compensation pattern
VNRPD n/f [1] Second spindle vertical pos/pos A Nose radius compensation patten
VNRPE n/f [1] First spindle base pos/pos B Nose radius compensation pattern
VNRPF n/f [1] First spindle vertical pos/pos B Nose radius compensation patten
mult
mult
VMTTL
VMTTR
5 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VNRPG n/f [1] Second spindle base pos/pos B Nose radius compensation pattern
VNRPH n/f [1] Second spindle vertical pos/pos B Nose radius compensation patten
VNRPN n/f [1] Nose radius compensation for pattern
VNRXA mult [1] First spindle base pos/pos A Nose radius compensation for X-axis
VNRXB mult [1] First spindle vertical pos/pos A Nose radius compensation for X-axis
VNRXC mult [1] Second spindle base pos/pos A Nose radius compensation for X-axis
VNRXD mult [1] Second spindle vertical pos/pos A Nose radius compensation for X-axis
VNRXE mult [1] First spindle base pos/pos B Nose radius compensation for X-axis
VNRXF mult [1] First spindle vertical pos/pos B Nose radius compensation for X-axis
VNRXG mult [1] Second spindle base pos/pos B Nose radius compensation for X-axis
VNRXH mult [1] Second spindle vertical pos/pos B Nose radius compensation for X-axis
VNRZA mult [1] First spindle base pos/pos A Nose radius compensation for Z-axis
VNRZB mult [1] First spindle vertical pos/pos A Nose radius compensation for Z-axis
VNRZC mult [1] Second spindle base pos/pos A Nose radius compensation for Z-axis
VNRZD mult [1] Second spindle vertical pos/pos A Nose radius compensation for Z-axis
VNRZE mult [1] First spindle base pos/pos A Nose radius compensation for Z-axis
VNRZF mult [1] First spindle vertical pos/pos B Nose radius compensation for Z-axis
VNRZG mult [1] Second spindle base pos/pos B Nose radius compensation for Z-axis
VNRZH mult [1] Second spindle vertical pos/pos B Nose radius compensation for Z-axis
VNSRX pgm [1] Nose radius compensation for X-axis
VNSRY yax [1] Nose radius compensation for Y-axis
VNSRZ pgm [1] Nose radius compensation for Z-axis
VNVLB sim Negative variable limit on B-axis (machine coordinate system)
VNVLW spc Negative variable limit on W-axis (machine coordinate system)
VNVLX pgm Negative variable limit on X-axis (machine coordinate system)
VNVLY yax Negative variable limit on Y-axis (machine coordinate system)
VNVLZ pgm Negative variable limit on Z-axis (machine coordinate system)
VOKF 4420 r/o DNC machining status (0=OK, 1=NG)
VORD pgm [1234] Output read condintion, I/O
VOSER n/f r/o Sensor error for Optical type
VPA n/f [1] Thermo Active Stabilizer L2- Presumed Temperature
VPAI pgm r/o π (Circular constant, Pi)
VPB n/f [1] Thermo Active Stabilizer L2- Thermal growth
VPC n/f [1] Thermo Active Stabilizer L2- Variation-A
VPCHB spc B-axis pitch
VPCHW sim W-axis pitch
VPCHX spc X-axis pitch
VPCHY spc Y-axis pitch
VPCHZ spc Z-axis pitch
VPCS n/f r/o Thermo Active Stabilizer L1- Variation data
6 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VPCSI n/f Thermo Active Stabilizer L1- Internal Variation data
VPD n/f [1] Thermo Active Stabilizer L2- Variation-B
VPE n/f [1] Thermo Active Stabilizer L2- Total Variation
VPFVB spc [1] B-axis pitch error compensation value
VPFVC spc [1] C-axis pitch error compensation value
VPFVT list [1] CT axis pitch error compensation value
VPFVW sim [1] ZC-axis pitch error compensation value
VPFVX spc [1] X-axis pitch error compensation value
VPFVY spc [1] Y-axis pitch error compensation value
VPFVZ spc [1] Z-axis pitch error compensation value
VPLOF spc M-axis zero offset for flat turning 0 to 359.999 None
VPNEV New variable for P-100
VPOCH gagy Appoint type of tool compensation Multi-system function
VPTMP n/f [1] Measurment temperature data
VPTSB spc Start position for B-axis compensation
VPTSP 5068S r/o Tailstock joint position for tow-along system
VPVLB sim Positive variable limit on B-axis (machine coordinate system)
VPVLW spc Positive variable limit on W-axis (machine coordinate system)
VPVLX pgm Positive variable limit on X-axis (machine coordinate system)
VPVLY yax Positive variable limit on Y-axis (machine coordinate system)
VPVLZ pgm Positive variable limit on Z-axis (machine coordinate system)
VPWSP 4373 Parts catcher workpiece chute position
VPWSV B Warming up cycle ON by Power save mode
VPWTP sub Parts catcher workpiece transfer position
VRBV list [1] Robot point data B-axis
VRCV 4721 [1] Robot point data C-axis
VRLZA Permission position of ZA-axis (robot/loader)
VRLZB Permission position of ZB-axis (robot/loader)
VRLZC 4998 Permission position of ZC-axis (robot/loader)
VRNGX gag X-axis datum ring position (program coordinate system)
VRNGZ gag Z-axis datum ring position (program coordinate system)
VRRG 4721 [1] Robot register data 0 to 32767 1 to 47
VRSTT pgm r/o Sequence restart ($00:OFF, $128:ON)
VRUND gag r/o 360 constant -
VRWV list [1] Robot point data W-axis
VRXV list [1] Robot point data X-axis
VRYV list [1] Robot point data Y-axis
VRZV 4721 [1] Robot point data Z-axis
VSATC mult r/o ATC spec active (1= Mac30, 2= Mac50)
VSBSD n/f 2nd Spindle Lower position (Mac 30)
7 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VSBSU n/f 2nd Spindle Upper position (Mac 30)
VSCTA spc Section designation
VSCTX spc Section position designation; X
VSCTY spc Section position designation; Y
VSCTZ spc Section position designation; Z
VSIDC list Spindle orientation (pin/electric type)
VSIOC gag [1], r/o C-axis command target point (program coordinate system)
VSIOW sim
VSIOX gag X-axis command target point (program coordinate system)
VSIOY yax Y-axis command target point (program coordinate system)
VSIOZ gag Z-axis command target point (program coordinate system)
VSKFA gag Gauging feedrate 2
VSKFB gag Gauging feedrate 1
VSKPC gag [1], r/o C-axis sensor touch point (machine coordinate system)
VSKPX gag [1], r/o X-axis sensor touch point (machine coordinate system)
VSKPY yax [1], r/o Y-axis sensor touch point (machine coordinate system)
VSKPZ gag [1], r/o Z-axis sensor touch point (machine coordinate system)
VSKXP sltY [1], r/o X-axis sensor touch point (program coordinate system)
VSKYP sltY [1], r/o Y-axis sensor touch point (program coordinate system)
VSKZP sltY [1], r/o Z-axis sensor touch point (program coordinate system)
VSLMD n/f r/o Slant Mode engaged
VSNTU gag r/o Dislocation between sensor center and sensor head in the C-axis reverse rotation
VSNWD gag r/o Dislocation between sensor center and sensor head in the C-axis forward rotation
VSNX gag [1] X-axis sensor position (machine coordinate system)
VSNZ gag [1] Z-axis sensor position (machine coordinate system)
VSOZB sim Z-axis command target point (program coordinate system)
VSPMD n/f r/o Spindle mode information
VSPOF n/f B Zero Offset of Spindle orientation
VSPPH n/f Retardation amount for spindle synchronization
VSRP 5068S r/o Steady rest joint position for a tow-along system
VSSOF n/f Zero Offset of 2nd Spindle orientation
VSYOF n/f Zero Offset of 2nd Spindle
VTAOR n/f A-turret index override
VTBDT 4943 r/o Tool breakage detected (Macturn) (0/1)
VTBOR n/f B-turret index override
VTFXA mult [1] First spindle base position/position A X -axis tool offset
VTFXB mult [1] First spindle vertical position/position A X -axis tool offset
VTFXC mult [1] Second spindle base position/position A X -axis tool offset
VTFXD mult [1] Second spindle vertical position/position A X -axis tool offset
VTFXE mult [1] First spindle base position/position B X -axis tool offset
8 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VTFXF mult [1] First spindle vertical position/position B X -axis tool offset
VTFXG mult [1] Second spindle base position/position B X -axis tool offset
VTFXH mult [1] Second spindle vertical position/position B X -axis tool offset
VTFYA mult [1] First spindle base position/position A Y -axis tool offset
VTFYB mult [1] First spindle vertical position/position A Y -axis tool offset
VTFYC mult [1] Second spindle base position/position A Y -axis tool offset
VTFYD mult [1] Second spindle vertical position/position A Y -axis tool offset
VTFYE mult [1] First spindle base position/position B Y -axis tool offset
VTFYF mult [1] First spindle vertical position/position B Y -axis tool offset
VTFYG mult [1] Second spindle base position/position B Y -axis tool offset
VTFYH mult [1] Second spindle vertical position/position B Y -axis tool offset
VTFZA mult [1] First spindle base position/position A Z -axis tool offset
VTFZB mult [1] First spindle vertical position/position A Z -axis tool offset
VTFZC mult [1] Second spindle base position/position A Z -axis tool offset
VTFZD mult [1] Second spindle vertical position/position A Z -axis tool offset
VTFZE mult [1] First spindle base position/position B Z -axis tool offset
VTFZF mult [1] First spindle vertical position/position B Z -axis tool offset
VTFZG mult [1] Second spindle base position/position B Z -axis tool offset
VTFZH mult [1] Second spindle vertical position/position B Z -axis tool offset
VTHRX spc Thread phase matching amount in the X-axis direction
VTHRZ spc Thread phase matching amount in the Z-axis direction
VTIDA mult ATC Index position (turret = TC1, 0/128)
VTIPN 2452 [1] Tool interference pattern number 0 to 2
VTIXN 2452 [1] Tool interference point; XN
VTIXP 2452 [1] Tool interference point; XP
VTIZN 2452 [1] Tool interference point; ZN
VTIZP 2452 [1] Tool interference point; ZP
VTLA1 spc [1] Tool nose angle 0 to 360.000
VTLA2 spc [1] Cutting edge angle 0 to 360.000
VTLCA gag [1] Actual tool wear amount for tool life 0 to 9999.999
VTLCN gag [1] Number of machined workpieces for tool life
VTLCT gag [1] Cutting time for tool life
VTLD spc [1] Tool holder dia./drill dia.
VTLFB indx [1] ATC second position Tool form code number 0 to 4
VTLFN spc [1] Tool form code number 0 to 4
VTLGN gag [1] Tool group number 0 to 24
VTLIB indx [1] ATC second position Tool classification code number 1 to 38
VTLIN spc [1] Tool classification code number 1 to 38
VTLL spc [1] Tool holder length/projection/drill length
VTLLF gag [1] Variable which indicates that the tool has been used to the life
9 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VTLMN [1], B Tool monitoring
VTLMT list [1] Tool type number 0 to 80
VTLNG gag [1] Variable which indicates that the tool was evaluated as NG in gauging
VTLNR indx [1] Nose radius of Button tool
VTLOA gag [1] Tool offset number (group 1) 0 to 32
VTLOB gag [1] Tool offset number (group 2)
VTLOC gag [1] Tool offset number (group 3)
VTLPA n/f [1] Tool shape of Base position
VTLPB n/f [1] Tool shape of Vertical position
VTLSA gag [1] Tool wear amount set for tool life 0 to 999.999
VTLSL n/f [1] Slant angle tool holder
VTLSN gag [1] Number set for tool life
VTLST gag [1] Time Set for tool life
VTLUS list [1] Variable which indicates that the tool was used in a program
VTLW spc [1] Tool width
VTLZL n/f Thermo active stabilizer L1- Tool length of Z-axis
VTMMG smag r/o Tool Designated for Main magazine (sub-mag spec)
VTOAA indx [1] Tool offset number A of tool at ATC 1st position
VTOAB indx [1] Tool offset number A of tool at ATC 2nd position
VTOBA indx [1] Tool offset number B of tool at ATC 1st position
VTOBB indx [1] Tool offset number B of tool at ATC 2nd position
VTOCA indx [1] Tool offset number C of tool at ATC 1st position
VTOCB indx [1] Tool offset number C of tool at ATC 2nd position
VTOCP AB213 Select of tool offset auto calculation (Macturn gaging)
VTOFX pgm [1] X-axis tool offset
VTOFY yax [1] Y-axis tool offset
VTOFZ pgm [1] Z-axis tool offset
VTOPC spc r/o Top cut judgment READ ONLY
VTRNL n/f B-turret index allow area- Minus limit
VTROX 4788 [1] Positioning error data for X-axis turret position
VTROZ 4788 [1] Positioning error data for Z-axis turret position
VTRPL n/f B-turret index allow area- Plus limit
VTRSM Appoint for clearness mode
VTRSP spc Transparent display designation
VTRTS list T-axis rapid feedrate (1/10 min-1) 1 to 32767 (OSP 7000)
VTSDA pgm Tailstock spindle diameter D2 0 to 9999.999
VTSDB pgm Tailstock center diameter D3
VTSL pgm Tailstock spindle projection L2
VTSPC mult [1] Turret specification table
VTTLN mult [1] Current tool in turret. (* Bracket value should always be 1 with H1 turret.)
10 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VTWCP r/o
VTWOX n/f [1] X-axis tool wear offset
VTWOZ n/f [1] Z-axis tool wear offset
VTWXA n/f [1] First spindle base position/position A X -axis tool wear offset
VTWXB n/f [1] First spindle vertical position/position A X -axis tool wear offset
VTWXC n/f [1] Second spindle base position/position A X -axis tool wear offset
VTWXD n/f [1] Second spindle vertical position/position A X -axis tool wear offset
VTWXE n/f [1] First spindle base position/position B X -axis tool wear offset
VTWXF n/f [1] First spindle vertical position/position B X -axis tool wear offset
VTWXG n/f [1] Second spindle base position/position B X -axis tool wear offset
VTWXH n/f [1] Second spindle vertical position/position B X -axis tool wear offset
VTWZA n/f [1] First spindle base position/position A Z -axis tool wear offset
VTWZB n/f [1] First spindle vertical position/position A Z -axis tool wear offset
VTWZC n/f [1] Second spindle base position/position A Z -axis tool wear offset
VTWZD n/f [1] Second spindle vertical position/position A Z -axis tool wear offset
VTWZE n/f [1] First spindle base position/position B Z -axis tool wear offset
VTWZF n/f [1] First spindle vertical position/position B Z -axis tool wear offset
VTWZG n/f [1] Second spindle base position/position B Z -axis tool wear offset
VTWZH n/f [1] Second spindle vertical position/position B Z -axis tool wear offset
VUACM pgm [1] User alarm comment
VUNIT list r/o Unit system 0 to 7
VWAP list Designated W-axis position
VWKCC oper [1] Work counter counting value
VWKCS oper [1] Work counter setting value 0 to 99999999 1 to 4
VWKR pgm Workpiece end face WR 0 to 9999.999
VWMON spc [1] Workpiece fly-out detection (monitoring pattern)
VWZBO AB199 Offset amount of W-axis – ZB-axis (LT10 transfer)
VXARP list Designated XA axis position
VXBRP list Designated XB axis position
VXMAB gag [1] Turret designation for offset 0/1
VXMAD gag Tool offset additional amount
VXMBD gag [1] Binary data of gauged BCD data 1 to 12
VXMCD gag [1] Offset amount for 5/7 step or BCD data, 0 to 999.999
VXMCO gag [1] Consecutive counter for OK
VXMDB
VXMDR gag Data read/not read variable 0/80 None
VXMDS gag Post-process gauging data set variable 0 to 128
VXMEC n/f [1] Abnormal offset counter
VXMER n/f [1] Abnormal offset limit
VXMMC n/f [1] Counter ignoring offset
11 of 11
System Variable List, Alphabetic
released: Jan 07
Var man suffix Description of system variable
VXMMD gag [1] Storing the result of previous gauging 1/2/4/8/16/32/64
VXMMO gag [1] Counter ignoring OK
VXMNC gag [1] Offset skip counter
VXMOG gag [1] Tool offset group number to be offset 1 to 3
VXMON gag [1] Tool offset number to be offset 0 to 32/64/96
VXMOP n/f [1] Pointing at Tool offset compensation
VXMPO gag [1] Input position number for post-process gauging unit 0 to 12
VXMTG gag [1] Tool group number to be offset 1 to 12/24
VXMTZ n/f [1] Axis appoint for tool compensation
VXMXZ gag [1] Axis designation for offset (0: X axis, 1: Z)
VXROP n/f [1] RS232 post-process gauging tool offset position
VYARP Movement position for Y-axis
VYMOD mult Y-axis mode engaged
VYSTP n/f r/o YS-axis spindle center position (program)
VZARP spcU Designated ZA-axis position (other function)
VZBRP spcU Designated ZB-axis position (other function)
VZCRP spcU Designated ZC-axis position (other function)
VZOFB sim B-axis zero offset
VZOFC pgm C-axis zero offset
VZOFW spc W-axis zero offset
VZOFX pgm X-axis zero offset
VZOFY yax Y-axis zero offset
VZOFZ pgm Z-axis zero offset
VZOZB sim ZB-axis zero offset
VZSHB sim B-axis zero shift
VZSHC pgm C-axis zero shift
VZSHW 4373 W-axis zero shift
VZSHX pgm X-axis zero shift
VZSHY yax Y-axis zero shift
VZSHZ pgm Z-axis zero shift
VZSZB sim ZB-axis zero shift
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Manufacturing Information Solutions Forum Index -> Okuma All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group