Manufacturing Information Solutions

[mistux]

Set the following parameters on the machine

Change following bits in the parameter #6000 only
bit 7 to 1 (ISO format)

Change following bits in the parameter #6003 only
bit 5 to 1
bit 1 to 1

Change following bits in the parameter #6021 only
bit 6 to 0
bit 5 to 0
bit 4 to 0
bit 1 to 0

Change following bits in the parameter #6022 only
bit 1 to 1
bit 0 to 1

6026 (baud rate) to 0001 1000 (2400)
6028 (baud rate) to 0001 1000 (2400)


Set the following on the PC Serial port tab


Baud 2400
Data bits 7
Parity Even
Stop bits 2

================

If you keep getting an error when the program hits its first line of code. I get "TH Parity Error". Just hit the "IN" button again and and it starts to go in.