JamieR Frequent Poster
Joined: 30 Jun 2004 Posts: 54 Location: Chicago
|
Posted: Fri Jul 02, 2004 12:01 pm Post subject: How To Return Mazak Z Axis to Home 2 Without Using G30 |
|
|
This code will return the head of a Mazak mill to the home 2 position without using G30. This can be very useful during probing.
Modify the line #592=#5223+[#591-.0315] to fit the particular machine.
In this example, the head is at home 2 (G30) when the Z machine position is -.0315. This example works in the G54 coordinate system. If you are using a different coordinate system change #5223 to the appropriate value. For example, G55 would use #5243, G56 #5263, G57 #5283, G58 #5303 and G59 #5323.
Code: | (POSITION HEAD TO HOME 2)
#590=#5223
#591=#[60000+#549]
#592=#5223+[#591-.0315]
G65P9810Z-#592F100. |
Hope you all like and can use it!
JamieR |
|