View previous topic :: View next topic |
Author |
Message |
JoeM Master Poster
![](images/avatars/39755367340fd7f9f62f4d.gif)
Joined: 09 Jul 2004 Posts: 122 Location: Jackson Hole, Wyoming USA
|
Posted: Tue Apr 26, 2005 10:32 pm Post subject: OT001 X + OVERTRAVEL (SOFT 1) ALARM |
|
|
OK, I guess you would call me a newby.
My CNC experience has been limited to Motoman robots and the last time I worked with one was 1995. After 13 years, the facility I was working at shut down and moved to Europe and China.
I am now currently employed with a military contractor working with CNC milling and lathe machines with the majority being Fanuc systems. I have relied on the internet to get me up to speed and have to say I like this site! I have referenced several posts to help me resolve some problems but now I am faced with another. I am getting a OT001 x +over travel (soft 1) alarm on the table X axis of a Takisawa MAC-V2E milling machine (Fanuc System 10). I'm guessing this is a stop position parameter for the X-axis travel issue. There is a limit switch at the end of stroke but it never makes it that far. Is this a parameter setting issue? How do I determine which parameter setting is responsible and access that part of the program to resolve it? _________________ Thanks.
===================
I would rather by Fly Fishing! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
JamieR Frequent Poster
![](images/avatars/gallery/Jak/jakav12.jpg)
Joined: 30 Jun 2004 Posts: 54 Location: Chicago
|
Posted: Tue Apr 26, 2005 10:34 pm Post subject: |
|
|
look at the stored stroke limits to fix this problem,if you turn the power on and hold the . - key at the same time there will be a screen that will ask if stored stroke REF. answer n and exit this screen. _________________ ++++++++++++++
Thanks! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|