View previous topic :: View next topic |
Author |
Message |
BIGmiralli Frequent Poster
![](images/avatars/gallery/College/army.gif)
Joined: 17 Apr 2007 Posts: 38 Location: Boston, Massachusetts
|
Posted: Thu Jul 16, 2009 10:10 am Post subject: YASNAC MX1 Memory Parameter |
|
|
I have a MATSURRA MV500 with YASNAK MX1 control and I'm looking for the parameter to extend the memory
I was using the machine normally and stop moving no alarm .
I called Yasnak and they made me wipe out the memory and put all the parameters back, before that I had 128.000 aprox memory, now I have 8.128. I have programs bigger than the actual memory that i can not load any more.
I thought that the parameter is # 6041
________
Marijuana Vaporizers
Last edited by BIGmiralli on Wed Feb 16, 2011 10:44 am; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
BIGmiralli Frequent Poster
![](images/avatars/gallery/College/army.gif)
Joined: 17 Apr 2007 Posts: 38 Location: Boston, Massachusetts
|
Posted: Thu Jul 16, 2009 10:12 am Post subject: |
|
|
Ok I fixed it here is the catch after I reload all the parameters on the machine i have to erase the memory ( O-9999 erase ) and it reloaded the actual memory set on the parameter #6041.
It seems thhat is the way to open more memory (even in MX3 control) after you change the parameter and restart the machine you have to erase the memory to show the added memory!
________
Sell vaporizers |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|