View previous topic :: View next topic |
Author |
Message |
JoeM Master Poster
![](images/avatars/39755367340fd7f9f62f4d.gif)
Joined: 09 Jul 2004 Posts: 122 Location: Jackson Hole, Wyoming USA
|
Posted: Fri Jan 18, 2008 7:37 pm Post subject: Busings inserted for tightness |
|
|
What is the best way to fit a bushing into another part, the customer wants a very tight fit. _________________ Thanks.
===================
I would rather by Fly Fishing! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
RanicInimim New Member
Joined: 30 May 2007 Posts: 5 Location: Mexico
|
Posted: Fri Jan 18, 2008 7:39 pm Post subject: |
|
|
If you put dry ice in a tub of alcahol the temp will be about -100 F put your bushings in ther for about an hour that will shrink them then you can press them into the other mating part for a very tight fit!
Make sure you use a proper container and thermal insulated gloves as that temp will burn you!
________
SUZUKI EIGER 400 HISTORY |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|