View previous topic :: View next topic |
Author |
Message |
dawn Master Poster
Joined: 26 Jun 2004 Posts: 311 Location: Mishawaka, IN
|
Posted: Thu Mar 09, 2006 7:47 pm Post subject: G.E. MARK CENTURY 1050 |
|
|
Q: I HAVE A G.E. MARK CENTURY 1050 CONTROL THAT WE WOULD LIKE TO CONNECT TO PREDATOR. WHAT WOULD BE REQUIRED TO MAKE THIS CONNECTION. (BTR, SOFTWARE, PC & CABLE?)
A: Needs a BTR |
|
Back to top |
|
|
dawn Master Poster
Joined: 26 Jun 2004 Posts: 311 Location: Mishawaka, IN
|
Posted: Tue Jun 05, 2007 9:53 am Post subject: |
|
|
You can get the program OUT of the machine using 600-Even-7-2 Xon/Xoff but you can NOT get it INTO the machine using the DB25 on the machine.
You will need a BTR to get the program into the machine.
RS-358 and RS-244 punch coades options on the control via the DB25F on the machine to an external tape punch.
150 cps
Data input is RS-227 punch tape
FYI: RS-358 needs all uppercase letters and RS-244 needs all lowercase letters
I used the Predator settings as called out in the PDF _________________ Dawn Mitchell
Manufacturing Information Solutions
www.mis-group.com |
|
Back to top |
|
|
|