View previous topic :: View next topic |
Author |
Message |
alain Guest
|
Posted: Mon Oct 31, 2005 9:18 pm Post subject: rectangular pocket milling |
|
|
hi, i am looking for a rectangular pocket macro for a meldas (mitsubishi) controller what i am trying to do is to give a line like g78 x2.y2. i4.j6.k.r.2d59 where x and y are the bottom left corner of the pocket i is the length j is the hight of the pocket k is the depth and d is the radius of the cutter.
thank you
alain |
|
Back to top |
|
|
franke Master Poster
Joined: 26 Jun 2004 Posts: 161 Location: Indiana, USA
|
Posted: Fri Feb 17, 2006 2:19 pm Post subject: |
|
|
I don't have one off the top of my head, but i would think that you could get one from your machine dealer or at least the local Mitsu. dealer.
Franke |
|
Back to top |
|
|
BillyB Frequent Poster
Joined: 27 Jul 2005 Posts: 60 Location: Lexington, KY, USA
|
Posted: Mon Feb 20, 2006 9:43 am Post subject: |
|
|
IF you can live with a zig zag pocket that starts in one corner,there is a functional example in the Yasnac MX-1 manual in the macro B section.
To make a spiral pocket you will need some math that will equal your cuts in x and y.In computer programmimg terms, a "displacement".
Hope this helps. |
|
Back to top |
|
|
|