Manufacturing Information Solutions

What is the best way to fit a bushing into another part, the customer wants a very tight fit.

Delete Confirmation
This code prompts the user if they realy want to delete a record

Sub btn_Delete_Click ()
On Error GoTo Err_btn_DeleteElement_Click
'**This whole section just prompt ...

Here is a site that one of my vendors suggested. It allows you to send someone a file that is up to 100 meg in size. So, if you try to send someone a large file in your e-mail and it gets bounced ba ...

I found this on the web it is a source for Fanuc cables and parts:

http://www.fanuccables.com/index.html

I have not used them, but thought it was worth saving the url of.

Does it have an RS-232 serial port on it?

Does it have a tape reader on it?

This has been sold Exclamation

Example G00
% (PROGRAM START FLAG)
:1001 (PROGRAM NUMBER 1001)
N5 G90 G20 (ABSOLUTE, AND INCH PROGRAMMING)
N10 M06 T2 (TOOL CHANGE, TOOL #2)
N15 M03 S1200 (SPINDLE ON CW, AT 1200 RPM)
N20 ...

I came acrost this on the net, and thought to shair it here with you all.

I haven't tried this software - but seems straight forward:

http://www.realhamradio.com/gearhome.htm

Its only $50 ...

OT series do not support keypad entry of the # character. You'll need to prepare the subprogram/part program with all necessary # entries on a PC/laptop and then upload it to the machine.

I am interested in a bar code reader that will allow me to read bar code lables that would be put on a small diameter tool, about the size of a pencil.

Will your scanners read a lable that is bent ...

ON A TAIWAN TAKISAWA EX-510 MILL/TURN LATHE WITH FANUC 18i TB CONTROL, HOW DO YOU CONTROL CONSTANT ROTATION OF THE C AXIS AT A SPECIFIED FEEDRATE WHILE SIMULTANEOUSLY FEEDING THE LIVE TOOLING, IN THE ...

An end mill isn't perfectly flat on the end, but it's usually good enough for counterboring (by plunging) a drilled hole for a socket head cap screw or something like that. If it had to be perfectly f ...

I don't think these Exec tapes use any form of error correction protocol.

It's always been my belief that there's a small "bootstrap loader" program at the beginning of the tape, which is the soft ...

I use machine HARDINGE (GE Fanuc series O-T) and I want to use PECK DRILLING MACRO program (sub-program).

Peck Drilling Macro:
---------------------------
:9135(PECK DRILLING MACRO)
IF[#2LE0 ...

Downhole oil tool industry, here. Lots and lots of Inconel 718, sometimes aged to make it a particular pleasure to machine.

If you do any turning, use a small positive lead angle and start around ...