Download Demo  |  Free Resource CD  |  Literature  |  What's New  |   Get BTR Quote  |  Buy Online

• Pre-configured to match your NC/CNC machine and designed for plug and play installation within your NC/CNC control
  
• Open architecture design, support any RS-232 based communications software application and computer platform
  
• Universal BTR design supports any NC, CNC, tape reader and tape punch combination
  
• Every model supports drip feeding of unlimited size NC/CNC programs (Note: Not all NC/CNC controls support drip feeding protocols)
  
• 100% compatible with every major tape reader and punch vendor
  
• 675 compatible with every major tape reader and punch vendor
  
• 675 compatible with every major NC/CNC vendor
  
• Opto-isolation protection between the NC/CNC and the PC filtering power surges or spikes
  
• Includes all Necessary Installation Hardware (Power supply if required, standard reader cable, standard punch cable, documentation, setup disk and Predator DNC setup documentation
  
  • Standard Reader Cables:  Acuraread, Addmaster, Decitek,
    Digitronix, EECO, Fanuc, GE, Ghilmetti, GNT, Oktronics, OKI, Remex, Ricom, Sanyo Denki, SloSyn, Tally and many more

• Standard Punch Cables:  As required for Facit and Remex punches

Easy Installation

• Pre-programmed reader, punch and control setting in EPROMS

• No dip switch settings

• Status LEDs

• Quality printed documentation

BTRs are usually installed inside the cabinet and are connected to the tape reader port.  Loading programs, executive tapes and drip feeding now becomes possible on older NC/CNC that have a tape reader.

Includes DNC Protocols 

• RS-491 Level 1

• RS-491 Level 2

• Software XON/XOFF

• ASCII/EIA

Six Standard Ports 

• RS-232 or RS-422 DB9 Male Serial

• RS-232 or RS-422 DB9 Female Parallel

• Remex Parallel Reader DB25 Male

• Facit/Remex Parallel Punch DB25 Female

• Serial Reader/Punch DB9 Female

• Terminal RJ14, For use with optional Hand Held Terminal

100% Reader Compatible

• Acraread

• Acuraread

• Addmaster

• Decitek

• Digitronics

• EECO

• Fanuc

• GE

• Ghielmetti

• GTNT
• Hughes
• Infranor

• Iomex

• Oktronics

• OKI

• Remex

• Ricom

• Sanyo Denki

• SloSyn

• Tally

• Wojak

• And many more

100% Punch Compatible

• Facit

• Remex

• MTBF 50,000 Operating Hours

• Less than 0.01% Failure Rate

• Surface Mount Electronics

Low Power Consumption

• Includes power supply

• Opto-Isolation protection between the NC/CNC and the PC

• Onboard DC voltage regulator

• +5 volts DC regulate @ 500 mA or

• +7.5 volts DC unregulated @ 500 mA

• Note:  Power can often be provided from the control